Jazz lo-fi can sound simple: a few chords, a soft beat, some crackle. Listen more closely and every track turns out to be a careful balance of a handful of ingredients, each chosen for what it adds and, just as often, for what it leaves out. This guide takes the sound apart piece by piece, from the electric piano at its centre to the noise floor beneath it, so that you can hear what is happening the next time a track drifts by in the background.
Keys: the heart of the sound
Most jazz lo-fi is built around a keyboard, and the instrument heard most often, or imitated most often, is the Rhodes electric piano. Instead of strings, its hammers strike thin metal tines attached to larger tone bars; together they behave like a tuning fork, and an electromagnetic pickup turns the vibration into a signal, much as on an electric guitar. Played softly, the tone is round and mellow; played harder, it gains a bell-like bite. The Rhodes became a fixture of jazz, soul and pop in the 1970s, which is precisely the era many lo-fi producers return to. Its cousin the Wurlitzer has a reedier, more nasal voice, and the acoustic piano appears too, usually muffled and distant, as if heard through a wall.
What the keys play matters as much as how they sound. Jazz lo-fi relies on seventh, ninth and eleventh chords, voiced close together in the middle of the keyboard, and on short chord progressions of two to four chords that repeat for the whole track. The familiar ii–V–I of jazz standards appears constantly, often with the last chord left slightly unresolved so the loop can begin again without a sense of arrival. Our guide to jazz chords for lo-fi explains these voicings in detail.
Harmony: emotion without a melody
In most popular music, emotion travels through a melody and a singer. In jazz lo-fi, the chords do much of that work themselves. A minor ninth sounds wistful, a major seventh sounds warm and slightly nostalgic, a chord with an added sixth sounds settled. Because the harmony already carries the mood, the melody can be sparse, a few notes of guitar or saxophone, or absent altogether. That is one reason the music suits concentration: there is feeling in it, but nothing that asks you to follow a story.
Bass: round and patient
The bass in jazz lo-fi is rarely busy. It usually plays the root of each chord, perhaps with a passing note into the next one, and it sits low and soft in the mix. Upright bass samples are common, as are electric basses played with the tone rolled off and synthesised sub-bass that is felt more than heard. The aim is weight and warmth rather than groove for its own sake: the bass gives the chords a floor to stand on, and then gets out of the way.
Drums: loose, swung and slightly dusty
The drums are where the genre’s hip hop roots show most clearly. A typical pattern is a kick, a soft snare or rimshot on the backbeat and a quiet hi-hat, often at a slow tempo. What gives it character is timing. Roger Linn, who designed the swing function on his drum machines and on the Akai MPC samplers, has explained it simply: swing delays the second sixteenth note of each pair. At 50 per cent the notes are straight; at 66 per cent they fall on a perfect triplet; and the in-between settings are where the life is. As he describes it, around 54 per cent loosens straight beats without sounding like swing, and around 58 to 62 per cent gives a natural, relaxed swing.
Many producers go further and avoid the grid altogether, nudging individual hits by hand or playing them in without quantising, in the manner associated with J Dilla. The drums themselves are usually processed to sound old: high frequencies rolled off, transients softened, a touch of distortion added. Part of that palette comes from early samplers such as the E-mu SP-1200, whose 12-bit resolution and 26.04 kHz sampling rate gave drums a gritty, warm edge that producers still imitate.
Melodic colours
Above the keys, bass and drums, a track usually has one or two colours that recur: a muted jazz guitar playing short phrases, a saxophone or flute line, a vibraphone, a vocal fragment pitched down until the words disappear. These sounds are often sampled from old records or recorded and then treated to sound as if they were. They appear and disappear, giving the loop a sense of movement without breaking its calm. A good producer uses them sparingly: one well-placed phrase every eight bars does more than a constant stream of notes.
Texture: the invisible instrument
Beneath everything sits the texture, the element that most clearly separates lo-fi from other kinds of instrumental hip hop. It is built from several small effects. Vinyl crackle and surface noise suggest an old record. Tape saturation rounds off peaks and adds gentle harmonics. A slow, slight wobble in pitch, the “wow and flutter” of a worn tape machine, makes sustained notes breathe. Low-pass filtering removes the brightest frequencies, so the whole track feels slightly distant, as if playing in the next room. Reducing the bit depth or sample rate adds a fine digital grain.
None of these effects is meant to be noticed on its own. Together they lower the contrast of the sound, much as a photographic filter softens an image, and that softness is a large part of why the music can sit in the background without becoming either boring or intrusive.
Space: the most underrated ingredient
The last ingredient is the one that is easiest to miss: space. Jazz lo-fi leaves room. Chords are often held rather than repeated, drum patterns leave gaps, and arrangements rarely use more than five or six elements at once. Reverb is used to place sounds in an imagined room rather than to wash them out. This restraint is deliberate. Music that fills every moment demands attention; music with air in it lets the listener’s thoughts fill the gaps. When a lo-fi track feels calming, it is often because of what is not there.
Listening with new ears
Try a small experiment with any jazz lo-fi track you like. Listen once only to the drums and notice where the hi-hats fall. Listen again only to the bass and count how few notes it plays. On a third pass, follow the keys and notice when the chord changes. Finally, listen for the crackle and hiss under everything, and imagine the track without it. Most people find that the music becomes more interesting the more clearly they hear its parts, and just as easy to let fade into the background afterwards.
If you would like to make this sound yourself, our guide on how to make jazz lo-fi beats turns these ingredients into a practical workflow. To understand where they came from, read our history of lo-fi, and for a broader introduction see what lo-fi music is.
Sources
- Wikipedia, “Rhodes piano” (tines, tone bars and pickups; popularity in the 1970s): en.wikipedia.org/wiki/Rhodes_piano
- Attack Magazine, “Roger Linn on swing, groove and the magic of the MPC’s timing”, 2013: attackmagazine.com
- MusicRadar, interview with Roger Linn on MPC swing, 2019: musicradar.com
- Wikipedia, “E-mu SP-1200” (12-bit resolution, 26.04 kHz sampling rate): en.wikipedia.org/wiki/E-mu_SP-1200
- Rossum Electro-Music, SP-1200 specifications: rossum-electro.com/products/sp-1200


